syslog
buildroot syslog
t113_linux/buildroot/buildroot-201902/package/sysklogd
buildroot syslog-ng
t113_linux/buildroot/buildroot-201902/package/syslog-ng
syslog-ng 是一个开源的 syslog 替代方案，它提供了更强大的日志处理和转发功能。
busybox syslog
buildroot/buildroot-201902/package/busybox
busybox 1.19.4的syslog是专门给嵌入式设备使用的，因此有一些功能被精简掉了，如syslog.conf，该版本不支持配置文件，所有配置都在启动syslogd守护进程时通过参数输入
t113_linux/out/t113/evb1_auto/longan/buildroot/build/busybox-1.29.3/sysklogd$ tree
.
├── built-in.o
├── Config.in
├── Config.src
├── Kbuild
├── Kbuild.src
├── klogd.c
├── klogd.o
├── lib.a
├── logger.c
├── logread.c
├── syslogd_and_logger.c
├── syslogd_and_logger.o
└── syslogd.c
参数配置
-O /userdata/syslog 缓存文件路径 -b 5 缓存文件个数
sh-4.4# cat /etc/init.d/S01syslogd
#!/bin/sh
DAEMON="syslogd"
PIDFILE="/var/run/$DAEMON.pid"
SYSLOGD_ARGS="-O /userdata/syslog -b 5"
# shellcheck source=/dev/null
[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
# BusyBox' syslogd does not create a pidfile, so pass "-n" in the command line
# and use "-m" to instruct start-stop-daemon to create one.
start() {
printf 'Starting %s: ' "$DAEMON"
# shellcheck disable=SC2086 # we need the word splitting
start-stop-daemon -b -m -S -q -p "$PIDFILE" -x "/sbin/$DAEMON" \
-- -n $SYSLOGD_ARGS
status=$?
if [ "$status" -eq 0 ]; then
echo "OK"
else
echo "FAIL"
fi
return "$status"
}
stop() {
printf 'Stopping %s: ' "$DAEMON"
start-stop-daemon -K -q -p "$PIDFILE"
status=$?
if [ "$status" -eq 0 ]; then
rm -f "$PIDFILE"
echo "OK"
else
echo "FAIL"
fi
return "$status"
}
restart() {
stop
sleep 1
start
}
case "$1" in
start|stop|restart)
"$1";;
reload)
# Restart, since there is no true "reload" feature.
restart;;
*)
echo "Usage: $0 {start|stop|restart|reload}"
exit 1
esac
修改方案
diff --git a/platform/framework/auto/rootfs/etc/init.d/S01syslogd b/platform/framework/auto/rootfs/etc/init.d/S01syslogd
index 6e642a678a..b99bcf2e68 100755
--- a/platform/framework/auto/rootfs/etc/init.d/S01syslogd
+++ b/platform/framework/auto/rootfs/etc/init.d/S01syslogd
@@ -3,7 +3,8 @@
DAEMON="syslogd"
PIDFILE="/var/run/$DAEMON.pid"
-SYSLOGD_ARGS=""
+SYSLOGD_ARGS="-O /userdata/syslog/log -b 20"
+mkdir -p /userdata/syslog
# shellcheck source=/dev/null
[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
var/log
T113/log$ tree
.
├── asound.state.lock
├── dbus
│ └── machine-id
├── dhcpd.leases
├── dhcpd.leases~
├── LCK..ttyS4
├── LCK..ttyUSB1
├── LCK..ttyUSB2
├── messages
├── messages.0
├── resolv.conf
├── runtime-root
└── subsys
└── dbus-daemon
实时显示日志命令
tail -f /var/log/messages
日志打印到syslog用法
#include <syslog.h>
syslog(LOG_INFO, "this is my log info.%d", 23); //使用方法与printk 类似可以格式化的输出
QT 打印日志到syslog的方法
#include <QCoreApplication>
#include <QSyslogMessage>
int main(int argc, char *argv[])
{
QCoreApplication a(argc, argv);
// 设置 syslog 的标识符和选项
openlog("MyQtApp", LOG_PID | LOG_CONS, LOG_USER);
// 创建一个 syslog 消息对象
QSyslogMessage message;
// 设置消息的优先级
message.setPriority(LOG_INFO);
// 设置消息的内容
message.setMsg("Hello, world!");
// 发送 syslog 消息
syslog() << message;
return a.exec();
}
485 串口
这里指明了ttyS4 串口哪个程序在占用
T113/log$ cat LCK..ttyS4
5149
smart_cabinet
kunos
ecdc5787de4ab6852e2b911c00000004
143c6549-afd2-4aba-84bb-2b9a3cb2ecd5
4G 串口
ttyUSB1 18295 smart_cabinet 程序正在占用
ttyUSB2 22005 pppd 程序在占用
lxg@lixiaogang:~/code/android_log/T113/log$ cat LCK..ttyUSB1
18295
smart_cabinet
kunos
ecdc5787de4ab6852e2b911c00000004
143c6549-afd2-4aba-84bb-2b9a3cb2ecd5
lxg@lixiaogang:~/code/android_log/T113/log$ cat LCK..ttyUSB2
22005
resolv.conf
在Linux和其他类Unix操作系统中，/etc/resolv.conf 是一个重要的系统配置文件，用于设置名称解析服务（DNS）的相关参数。当用户尝试访问互联网上的域名时，计算机需要将这些域名转换为IP地址以便进行通信。
sh-4.4# cat resolv.conf
nameserver 211.138.21.66
nameserver 211.138.23.66
var/log/messages
syslog.info syslogd started: BusyBox v1.29.3
Jan 1 08:00:02 kunos syslog.info syslogd started: BusyBox v1.29.3
Jan 1 08:00:03 kunos user.notice kernel: klogd started: BusyBox v1.29.3 (2023-12-12 18:40:05 CST)
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Jan 1 08:00:03 kunos user.notice kernel: [ 0.000000] Linux version 5.4.61-ab59 (lxg@lxg) (arm-linux-gnueabi-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412, GNU ld (Linaro_Binutils-2016.05) 2.25.0 Linaro 2016_02) #1 SMP PREEMPT Tue Dec 12 19:32:15 CST 2023
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] CPU: div instructions available: patching division code
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] OF: fdt: Machine model: rp-t113
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] printk: bootconsole [earlycon0] enabled
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] cma: Reserved 32 MiB at 0x46000000
Jan 1 08:00:03 kunos user.debug kernel: [ 0.000000] On node 0 totalpages: 32768
Jan 1 08:00:03 kunos user.debug kernel: [ 0.000000] Normal zone: 256 pages used for memmap
Jan 1 08:00:03 kunos user.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Jan 1 08:00:03 kunos user.debug kernel: [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] psci: probing for conduit method from DT.
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] psci: PSCIv1.0 detected in firmware.
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] psci: Using standard PSCI v0.2 function IDs
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] psci: SMC Calling Convention v1.0
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] percpu: Embedded 15 pages/cpu s31040 r8192 d22208 u61440
Jan 1 08:00:03 kunos user.debug kernel: [ 0.000000] pcpu-alloc: s31040 r8192 d22208 u61440 alloc=15*4096
Jan 1 08:00:03 kunos user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
Jan 1 08:00:03 kunos user.notice kernel: [ 0.000000] Kernel command line: ubi.block=0,rootfsA earlyprintk= clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p6 init=/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] printk: log_buf_len individual max cpu contribution: 131072 bytes
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] printk: log_buf_len total cpu_extra contributions: 131072 bytes
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] printk: log_buf_len min size: 16384 bytes
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] printk: log_buf_len: 262144 bytes
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] printk: early log buf free: 14112(86%)
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] Memory: 72292K/131072K available (7168K kernel code, 433K rwdata, 2644K rodata, 1024K init, 172K bss, 26012K reserved, 32768K cma-reserved)
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] Tasks RCU enabled.
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Jan 1 08:00:03 kunos user.notice kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x24c/0x3cc with crng_init=0
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Jan 1 08:00:03 kunos user.info kernel: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Jan 1 08:00:03 kunos user.info kernel: [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Jan 1 08:00:03 kunos user.info kernel: [ 0.008009] Switching to timer-based delay loop, resolution 41ns
Jan 1 08:00:03 kunos user.info kernel: [ 0.014194] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Jan 1 08:00:03 kunos user.info kernel: [ 0.024234] Console: colour dummy device 80x30
Jan 1 08:00:03 kunos user.info kernel: [ 0.028703] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
Jan 1 08:00:03 kunos user.info kernel: [ 0.039076] pid_max: default: 32768 minimum: 301
Jan 1 08:00:03 kunos user.info kernel: [ 0.043880] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Jan 1 08:00:03 kunos user.info kernel: [ 0.051217] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Jan 1 08:00:03 kunos user.info kernel: [ 0.059594] CPU: Testing write buffer coherency: ok
Jan 1 08:00:03 kunos user.err kernel: [ 0.064832] /cpus/cpu@0 missing clock-frequency property
Jan 1 08:00:03 kunos user.err kernel: [ 0.070158] /cpus/cpu@1 missing clock-frequency property
Jan 1 08:00:03 kunos user.info kernel: [ 0.075494] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Jan 1 08:00:03 kunos user.info kernel: [ 0.081770] Setting up static identity map for 0x40100000 - 0x40100060
Jan 1 08:00:03 kunos user.info kernel: [ 0.088463] rcu: Hierarchical SRCU implementation.
Jan 1 08:00:03 kunos user.err kernel: [ 0.093593] BOOTEVENT: 93.583790: ON
Jan 1 08:00:03 kunos user.info kernel: [ 0.097970] smp: Bringing up secondary CPUs ...
Jan 1 08:00:03 kunos user.info kernel: [ 0.103917] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Jan 1 08:00:03 kunos user.info kernel: [ 0.104073] smp: Brought up 1 node, 2 CPUs
Jan 1 08:00:03 kunos user.info kernel: [ 0.113900] SMP: Total of 2 processors activated (96.00 BogoMIPS).
Jan 1 08:00:03 kunos user.info kernel: [ 0.120088] CPU: All CPU(s) started in SVC mode.
Jan 1 08:00:03 kunos user.info kernel: [ 0.125224] devtmpfs: initialized
Jan 1 08:00:03 kunos user.info kernel: [ 0.141477] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Jan 1 08:00:03 kunos user.info kernel: [ 0.149693] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Jan 1 08:00:03 kunos user.info kernel: [ 0.159573] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
Jan 1 08:00:03 kunos user.info kernel: [ 0.167786] pinctrl core: initialized pinctrl subsystem
Jan 1 08:00:03 kunos user.info kernel: [ 0.174423] NET: Registered protocol family 16
Jan 1 08:00:03 kunos user.info kernel: [ 0.180715] DMA: preallocated 256 KiB pool for atomic coherent allocations
Jan 1 08:00:03 kunos user.info kernel: [ 0.222978] rtc_ccu: sunxi ccu init OK
Jan 1 08:00:03 kunos user.info kernel: [ 0.229441] ccu: sunxi ccu init OK
Jan 1 08:00:03 kunos user.info kernel: [ 0.233287] r_ccu: sunxi ccu init OK
Jan 1 08:00:03 kunos user.info kernel: [ 0.289826] iommu: Default domain type: Translated
Jan 1 08:00:03 kunos user.info kernel: [ 0.294984] sunxi iommu: irq = 24
Jan 1 08:00:03 kunos user.notice kernel: [ 0.299404] SCSI subsystem initialized
Jan 1 08:00:03 kunos user.info kernel: [ 0.303565] usbcore: registered new interface driver usbfs
Jan 1 08:00:03 kunos user.info kernel: [ 0.309166] usbcore: registered new interface driver hub
Jan 1 08:00:03 kunos user.info kernel: [ 0.314603] usbcore: registered new device driver usb
Jan 1 08:00:03 kunos user.info kernel: [ 0.319911] mc: Linux media interface: v0.10
Jan 1 08:00:03 kunos user.info kernel: [ 0.324260] videodev: Linux video capture interface: v2.00
Jan 1 08:00:03 kunos user.info kernel: [ 0.331151] Advanced Linux Sound Architecture Driver Initialized.
Jan 1 08:00:03 kunos user.info kernel: [ 0.337941] Bluetooth: Core ver 2.22
Jan 1 08:00:03 kunos user.info kernel: [ 0.341655] NET: Registered protocol family 31
Jan 1 08:00:03 kunos user.info kernel: [ 0.346113] Bluetooth: HCI device and connection manager initialized
Jan 1 08:00:03 kunos user.info kernel: [ 0.352543] Bluetooth: HCI socket layer initialized
Jan 1 08:00:03 kunos user.info kernel: [ 0.357437] Bluetooth: L2CAP socket layer initialized
Jan 1 08:00:03 kunos user.info kernel: [ 0.362564] Bluetooth: SCO socket layer initialized
Jan 1 08:00:03 kunos user.info kernel: [ 0.367758] pwm module init!
Jan 1 08:00:03 kunos user.info kernel: [ 0.372112] g2d 5410000.g2d: Adding to iommu group 0
Jan 1 08:00:03 kunos user.info kernel: [ 0.377527] G2D: rcq version initialized.major:251
Jan 1 08:00:03 kunos user.info kernel: [ 0.383015] input: sunxi-keyboard as /devices/virtual/input/input0
Jan 1 08:00:03 kunos user.info kernel: [ 0.390723] clocksource: Switched to clocksource arch_sys_counter
Jan 1 08:00:03 kunos user.info kernel: [ 0.406102] sun8iw20-pinctrl pio: initialized sunXi PIO driver
Jan 1 08:00:03 kunos user.info kernel: [ 0.426112] thermal_sys: Registered thermal governor 'step_wise'
Jan 1 08:00:03 kunos user.info kernel: [ 0.426119] thermal_sys: Registered thermal governor 'user_space'
Jan 1 08:00:03 kunos user.info kernel: [ 0.432819] NET: Registered protocol family 2
Jan 1 08:00:03 kunos user.info kernel: [ 0.444079] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Jan 1 08:00:03 kunos user.info kernel: [ 0.452517] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Jan 1 08:00:03 kunos user.info kernel: [ 0.460189] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
Jan 1 08:00:03 kunos user.info kernel: [ 0.467291] TCP: Hash tables configured (established 1024 bind 1024)
Jan 1 08:00:03 kunos user.info kernel: [ 0.473784] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Jan 1 08:00:03 kunos user.info kernel: [ 0.480345] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Jan 1 08:00:03 kunos user.info kernel: [ 0.487551] NET: Registered protocol family 1
Jan 1 08:00:03 kunos user.notice kernel: [ 0.494535] Initialise system trusted keyrings
Jan 1 08:00:03 kunos user.info kernel: [ 0.499132] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Jan 1 08:00:03 kunos user.info kernel: [ 0.506317] fuse: init (API version 7.31)
Jan 1 08:00:03 kunos user.info kernel: [ 0.539098] NET: Registered protocol family 38
Jan 1 08:00:03 kunos user.notice kernel: [ 0.543809] Key type asymmetric registered
Jan 1 08:00:03 kunos user.notice kernel: [ 0.547911] Asymmetric key parser 'x509' registered
Jan 1 08:00:03 kunos user.info kernel: [ 0.552883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Jan 1 08:00:03 kunos user.info kernel: [ 0.560283] io scheduler mq-deadline registered
Jan 1 08:00:03 kunos user.info kernel: [ 0.564844] io scheduler kyber registered
Jan 1 08:00:03 kunos user.info kernel: [ 0.568946] atomic64_test: passed
Jan 1 08:00:03 kunos user.info kernel: [ 0.573584] [DISP]disp_module_init
Jan 1 08:00:03 kunos user.info kernel: [ 0.577508] disp 5000000.disp: Adding to iommu group 0
Jan 1 08:00:03 kunos user.warn kernel: [ 0.583332] [DISP] disp_init,line:2386:
Jan 1 08:00:03 kunos user.warn kernel: [ 0.583337] smooth display screen:0 type:1 mode:4
Jan 1 08:00:03 kunos user.warn kernel: [ 0.608240] [DISP] disp_init_hdmi,line:1047:
Jan 1 08:00:03 kunos user.warn kernel: [ 0.608244] dont support hdmi
Jan 1 08:00:03 kunos user.warn kernel: [ 0.615850] display_fb_request,fb_id:0
Jan 1 08:00:03 kunos user.warn kernel: [ 0.632473] disp_al_manager_apply ouput_type:1
Jan 1 08:00:03 kunos user.warn kernel: [ 0.637093] [DISP] lcd_clk_config,line:735:
Jan 1 08:00:03 kunos user.warn kernel: [ 0.637104] disp 0, clk: pll(408000000),clk(408000000),dclk(68000000) dsi_rate(68000000)
Jan 1 08:00:03 kunos user.warn kernel: [ 0.637104] clk real:pll(408000000),clk(408000000),dclk(102000000) dsi_rate(150000000)
Jan 1 08:00:03 kunos user.info kernel: [ 0.651312] [DISP]disp_module_init finish
Jan 1 08:00:03 kunos user.err kernel: [ 0.658058] sunxi_pwm_enable_dual: can't parse pwm device
Jan 1 08:00:03 kunos user.warn kernel: [ 0.663305] sunxi_sid_init()551 - insmod ok
Jan 1 08:00:03 kunos user.info kernel: [ 0.672146] pwm-regulator: supplied by regulator-dummy
Jan 1 08:00:03 kunos user.err kernel: [ 0.680136] uart uart0: get regulator failed
Jan 1 08:00:03 kunos user.info kernel: [ 0.681907] Freeing logo buffer memory: 4000K
Jan 1 08:00:03 kunos user.warn kernel: [ 0.684499] uart uart0: uart0 supply uart not found, using dummy regulator
Jan 1 08:00:03 kunos user.info kernel: [ 0.696050] uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
Jan 1 08:00:03 kunos user.warn kernel: [ 0.703931] sw_console_setup()1784 - console setup baud 115200 parity n bits 8, flow n
Jan 1 08:00:03 kunos user.info kernel: [ 0.711912] printk: console [ttyS0] enabled
Jan 1 08:00:03 kunos user.info kernel: [ 0.720817] printk: bootconsole [earlycon0] disabled
Jan 1 08:00:03 kunos user.warn kernel: [ 0.732154] sun8iw20-pinctrl pio: pio supply vcc-pg not found, using dummy regulator
Jan 1 08:00:03 kunos user.err kernel: [ 0.741413] uart uart1: get regulator failed
Jan 1 08:00:03 kunos user.warn kernel: [ 0.746220] uart uart1: uart1 supply uart not found, using dummy regulator
Jan 1 08:00:03 kunos user.info kernel: [ 0.754300] uart1: ttyS1 at MMIO 0x2500400 (irq = 35, base_baud = 1500000) is a SUNXI
Jan 1 08:00:03 kunos user.warn kernel: [ 0.763791] sun8iw20-pinctrl pio: pio supply vcc-pb not found, using dummy regulator
Jan 1 08:00:03 kunos user.err kernel: [ 0.772867] uart uart4: get regulator failed
Jan 1 08:00:03 kunos user.warn kernel: [ 0.777672] uart uart4: uart4 supply uart not found, using dummy regulator
Jan 1 08:00:03 kunos user.info kernel: [ 0.785745] uart4: ttyS4 at MMIO 0x2501000 (irq = 36, base_baud = 1500000) is a SUNXI
Jan 1 08:00:03 kunos user.err kernel: [ 0.795362] uart uart5: get regulator failed
Jan 1 08:00:03 kunos user.warn kernel: [ 0.800175] uart uart5: uart5 supply uart not found, using dummy regulator
Jan 1 08:00:03 kunos user.info kernel: [ 0.808274] uart5: ttyS5 at MMIO 0x2501400 (irq = 37, base_baud = 1500000) is a SUNXI
Jan 1 08:00:03 kunos user.info kernel: [ 0.818186] misc dump reg init
Jan 1 08:00:03 kunos user.info kernel: [ 0.824692] libphy: Fixed MDIO Bus: probed
Jan 1 08:00:03 kunos user.info kernel: [ 0.829298] CAN device driver interface
Jan 1 08:00:03 kunos user.warn kernel: [ 0.834621] sun8iw20-pinctrl pio: pio supply vcc-pe not found, using dummy regulator
Jan 1 08:00:03 kunos user.info kernel: [ 0.843574] sunxi gmac driver's version: 1.0.0
Jan 1 08:00:03 kunos user.info kernel: [ 0.848759] gmac-power0: NULL
Jan 1 08:00:03 kunos user.info kernel: [ 0.852111] gmac-power1: NULL
Jan 1 08:00:03 kunos user.info kernel: [ 0.855438] gmac-power2: NULL
Jan 1 08:00:03 kunos user.err kernel: [ 0.859915] Failed to alloc md5
Jan 1 08:00:03 kunos user.warn kernel: [ 0.863482] eth0: Use random mac address
Jan 1 08:00:03 kunos user.info kernel: [ 0.868215] PPP generic driver version 2.4.2
Jan 1 08:00:03 kunos user.info kernel: [ 0.873315] PPP BSD Compression module registered
Jan 1 08:00:03 kunos user.info kernel: [ 0.878597] PPP Deflate Compression module registered
Jan 1 08:00:03 kunos user.info kernel: [ 0.884308] PPP MPPE Compression module registered
Jan 1 08:00:03 kunos user.info kernel: [ 0.889684] NET: Registered protocol family 24
Jan 1 08:00:03 kunos user.info kernel: [ 0.894834] usbcore: registered new interface driver asix
Jan 1 08:00:03 kunos user.info kernel: [ 0.900993] usbcore: registered new interface driver ax88179_178a
Jan 1 08:00:03 kunos user.info kernel: [ 0.907888] usbcore: registered new interface driver cdc_ether
Jan 1 08:00:03 kunos user.info kernel: [ 0.914528] usbcore: registered new interface driver cdc_eem
Jan 1 08:00:03 kunos user.info kernel: [ 0.920956] usbcore: registered new interface driver rndis_host
Jan 1 08:00:03 kunos user.info kernel: [ 0.927681] usbcore: registered new interface driver cdc_ncm
Jan 1 08:00:03 kunos user.info kernel: [ 0.934112] usbcore: registered new interface driver qmi_wwan
Jan 1 08:00:03 kunos user.info kernel: [ 0.940628] usbcore: registered new interface driver cdc_mbim
Jan 1 08:00:03 kunos user.info kernel: [ 0.947096] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 08:00:03 kunos user.warn kernel: [ 0.954430] sunxi-ehci: EHCI SUNXI driver
Jan 1 08:00:03 kunos user.warn kernel: [ 0.959388] get ehci0-controller wakeup-source is fail.
Jan 1 08:00:03 kunos user.warn kernel: [ 0.965397] sunxi ehci0-controller don't init wakeup source
Jan 1 08:00:03 kunos user.warn kernel: [ 0.971671] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0c8dc50, 0x:c8836000, irq_no:38
Jan 1 08:00:03 kunos user.warn kernel: [ 0.983683] [sunxi-ehci0]: Not init ehci0
Jan 1 08:00:03 kunos user.warn kernel: [ 0.988510] get ehci1-controller wakeup-source is fail.
Jan 1 08:00:03 kunos user.warn kernel: [ 0.994504] sunxi ehci1-controller don't init wakeup source
Jan 1 08:00:03 kunos user.warn kernel: [ 1.000776] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xc0c8e170, 0x:c883a000, irq_no:3a
Jan 1 08:00:03 kunos user.warn kernel: [ 1.013085] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator
Jan 1 08:00:03 kunos user.info kernel: [ 1.025469] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
Jan 1 08:00:03 kunos user.info kernel: [ 1.032792] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
Jan 1 08:00:03 kunos user.info kernel: [ 1.042833] sunxi-ehci 4200000.ehci1-controller: irq 58, io mem 0x04200000
Jan 1 08:00:03 kunos user.info kernel: [ 1.080745] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
Jan 1 08:00:03 kunos user.info kernel: [ 1.088570] sunxi-ehci 4200000.ehci1-controller: ehci_irq: highspeed device connect
Jan 1 08:00:03 kunos user.info kernel: [ 1.097747] hub 1-0:1.0: USB hub found
Jan 1 08:00:03 kunos user.info kernel: [ 1.102039] hub 1-0:1.0: 1 port detected
Jan 1 08:00:03 kunos user.info kernel: [ 1.107221] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 08:00:03 kunos user.warn kernel: [ 1.114216] sunxi-ohci: OHCI SUNXI driver
Jan 1 08:00:03 kunos user.warn kernel: [ 1.119194] get ohci0-controller wakeup-source is fail.
Jan 1 08:00:03 kunos user.warn kernel: [ 1.125211] sunxi ohci0-controller don't init wakeup source
Jan 1 08:00:03 kunos user.warn kernel: [ 1.131485] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xc0c8dee0
Jan 1 08:00:03 kunos user.warn kernel: [ 1.141159] [sunxi-ohci0]: Not init ohci0
Jan 1 08:00:03 kunos user.warn kernel: [ 1.145984] get ohci1-controller wakeup-source is fail.
Jan 1 08:00:03 kunos user.warn kernel: [ 1.151995] sunxi ohci1-controller don't init wakeup source
Jan 1 08:00:03 kunos user.warn kernel: [ 1.158250] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xc0c8e400
Jan 1 08:00:03 kunos user.warn kernel: [ 1.168211] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator
Jan 1 08:00:03 kunos user.info kernel: [ 1.180570] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
Jan 1 08:00:03 kunos user.info kernel: [ 1.187854] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
Jan 1 08:00:03 kunos user.info kernel: [ 1.197795] sunxi-ohci 4200400.ohci1-controller: irq 59, io mem 0x04200400
Jan 1 08:00:03 kunos user.info kernel: [ 1.275680] hub 2-0:1.0: USB hub found
Jan 1 08:00:03 kunos user.info kernel: [ 1.279938] hub 2-0:1.0: 1 port detected
Jan 1 08:00:03 kunos user.info kernel: [ 1.285276] usbcore: registered new interface driver cdc_acm
Jan 1 08:00:03 kunos user.info kernel: [ 1.291654] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 1 08:00:03 kunos user.info kernel: [ 1.300759] usbcore: registered new interface driver cdc_wdm
Jan 1 08:00:03 kunos user.info kernel: [ 1.307356] usbcore: registered new interface driver uas
Jan 1 08:00:03 kunos user.info kernel: [ 1.313470] usbcore: registered new interface driver usb-storage
Jan 1 08:00:03 kunos user.info kernel: [ 1.320274] usbcore: registered new interface driver ums-alauda
Jan 1 08:00:03 kunos user.info kernel: [ 1.327177] usbcore: registered new interface driver ums-cypress
Jan 1 08:00:03 kunos user.info kernel: [ 1.334030] usbcore: registered new interface driver ums-datafab
Jan 1 08:00:03 kunos user.info kernel: [ 1.340864] usbcore: registered new interface driver ums_eneub6250
Jan 1 08:00:03 kunos user.info kernel: [ 1.347863] usbcore: registered new interface driver ums-freecom
Jan 1 08:00:03 kunos user.info kernel: [ 1.354682] usbcore: registered new interface driver ums-isd200
Jan 1 08:00:03 kunos user.info kernel: [ 1.361403] usbcore: registered new interface driver ums-jumpshot
Jan 1 08:00:03 kunos user.info kernel: [ 1.368301] usbcore: registered new interface driver ums-karma
Jan 1 08:00:03 kunos user.info kernel: [ 1.374926] usbcore: registered new interface driver ums-onetouch
Jan 1 08:00:03 kunos user.info kernel: [ 1.381862] usbcore: registered new interface driver ums-realtek
Jan 1 08:00:03 kunos user.info kernel: [ 1.388665] usbcore: registered new interface driver ums-sddr09
Jan 1 08:00:03 kunos user.info kernel: [ 1.395641] usbcore: registered new interface driver ums-sddr55
Jan 1 08:00:03 kunos user.info kernel: [ 1.402552] usbcore: registered new interface driver ums-usbat
Jan 1 08:00:03 kunos user.info kernel: [ 1.409273] usbcore: registered new interface driver ch341
Jan 1 08:00:03 kunos user.info kernel: [ 1.415505] usbserial: USB Serial support registered for ch341-uart
Jan 1 08:00:03 kunos user.info kernel: [ 1.422635] usbcore: registered new interface driver cp210x
Jan 1 08:00:03 kunos user.info kernel: [ 1.428933] usbserial: USB Serial support registered for cp210x
Jan 1 08:00:03 kunos user.info kernel: [ 1.435676] usbcore: registered new interface driver option
Jan 1 08:00:03 kunos user.info kernel: [ 1.442006] usbserial: USB Serial support registered for GSM modem (1-port)
Jan 1 08:00:03 kunos user.info kernel: [ 1.450001] usbcore: registered new interface driver pl2303
Jan 1 08:00:03 kunos user.info kernel: [ 1.456325] usbserial: USB Serial support registered for pl2303
Jan 1 08:00:03 kunos user.err kernel: [ 1.465568] ts probe start
Jan 1 08:00:03 kunos user.info kernel: [ 1.466008] input: 2009c00.rtp as /devices/platform/soc@3000000/2009c00.rtp/input/input1
Jan 1 08:00:03 kunos user.info kernel: [ 1.478194] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
Jan 1 08:00:03 kunos user.err kernel: [ 1.481246] ts probe success
Jan 1 08:00:03 kunos user.info kernel: [ 1.481729] Gt9xx driver installing..
Jan 1 08:00:03 kunos user.info kernel: [ 1.493530] sunxi_gpadc_init,2137, success
Jan 1 08:00:03 kunos user.err kernel: [ 1.498516] sunxi_gpadc_setup: get channel scan data failed
Jan 1 08:00:03 kunos user.info kernel: [ 1.505092] input: sunxi-gpadc0 as /devices/virtual/input/input2
Jan 1 08:00:03 kunos user.info kernel: [ 1.512549] i2c /dev entries driver
Jan 1 08:00:03 kunos user.info kernel: [ 1.516698] IR NEC protocol handler initialized
Jan 1 08:00:03 kunos user.info kernel: [ 1.521827] IR RC5(x/sz) protocol handler initialized
Jan 1 08:00:03 kunos user.info kernel: [ 1.528830] usbcore: registered new interface driver uvcvideo
Jan 1 08:00:03 kunos user.info kernel: [ 1.535354] USB Video Class driver (1.1.1)
Jan 1 08:00:03 kunos user.info kernel: [ 1.539948] gspca_main: v2.14.0 registered
Jan 1 08:00:03 kunos user.warn kernel: [ 1.544583] sunxi cedar version 1.1
Jan 1 08:00:03 kunos user.info kernel: [ 1.548708] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
Jan 1 08:00:03 kunos user.debug kernel: [ 1.555016] VE: sunxi_cedar_probe power-domain init!!!
Jan 1 08:00:03 kunos user.debug kernel: [ 1.560815] VE: install start!!!
Jan 1 08:00:03 kunos user.debug kernel: [ 1.560815]
Jan 1 08:00:03 kunos user.info kernel: [ 1.566387] VE: cedar-ve the get irq is 43
Jan 1 08:00:03 kunos user.info kernel: [ 1.566387]
Jan 1 08:00:03 kunos user.info kernel: [ 1.572928] VE: ve_debug_proc_info:(ptrval), data:(ptrval), lock:(ptrval)
Jan 1 08:00:03 kunos user.info kernel: [ 1.572928]
Jan 1 08:00:03 kunos user.debug kernel: [ 1.582253] VE: install end!!!
Jan 1 08:00:03 kunos user.debug kernel: [ 1.582253]
Jan 1 08:00:03 kunos user.debug kernel: [ 1.587339] VE: sunxi_cedar_probe
Jan 1 08:00:03 kunos user.info kernel: [ 1.591459] Driver for 1-wire Dallas network protocol.
Jan 1 08:00:03 kunos user.info kernel: [ 1.598540] sunxi-wdt 20500a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Jan 1 08:00:03 kunos user.warn kernel: [ 1.608041] flysun50i_cpufreq_init===========
Jan 1 08:00:03 kunos user.warn kernel: [ 1.614835] sun8iw20-pinctrl pio: pio supply vcc-pc not found, using dummy regulator
Jan 1 08:00:03 kunos user.info kernel: [ 1.623780] sunxi-mmc 4022000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-05-24 16:10)
Jan 1 08:00:03 kunos user.info kernel: [ 1.633811] sunxi-mmc 4022000.sdmmc: ***ctl-spec-caps*** 308
Jan 1 08:00:03 kunos user.info kernel: [ 1.640223] sunxi-mmc 4022000.sdmmc: No vmmc regulator found
Jan 1 08:00:03 kunos user.info kernel: [ 1.646651] sunxi-mmc 4022000.sdmmc: No vqmmc regulator found
Jan 1 08:00:03 kunos user.info kernel: [ 1.653140] sunxi-mmc 4022000.sdmmc: No vdmmc regulator found
Jan 1 08:00:03 kunos user.info kernel: [ 1.659602] sunxi-mmc 4022000.sdmmc: No vd33sw regulator found
Jan 1 08:00:03 kunos user.info kernel: [ 1.666163] sunxi-mmc 4022000.sdmmc: No vd18sw regulator found
Jan 1 08:00:03 kunos user.info kernel: [ 1.672723] sunxi-mmc 4022000.sdmmc: No vq33sw regulator found
Jan 1 08:00:03 kunos user.info kernel: [ 1.679284] sunxi-mmc 4022000.sdmmc: No vq18sw regulator found
Jan 1 08:00:03 kunos user.warn kernel: [ 1.685867] sunxi-mmc 4022000.sdmmc: Cann't get pin bias hs pinstate,check if needed
Jan 1 08:00:03 kunos user.info kernel: [ 1.695444] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
Jan 1 08:00:03 kunos user.info kernel: [ 1.709074] hub 1-1:1.0: USB hub found
Jan 1 08:00:03 kunos user.info kernel: [ 1.713848] hub 1-1:1.0: 4 ports detected
Jan 1 08:00:03 kunos user.info kernel: [ 1.719260] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
Jan 1 08:00:03 kunos user.info kernel: [ 1.743593] sunxi-mmc 4022000.sdmmc: detmode:alway in(non removable)
Jan 1 08:00:03 kunos user.info kernel: [ 1.750796] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
Jan 1 08:00:03 kunos user.info kernel: [ 1.761781] hidraw: raw HID events driver (C) Jiri Kosina
Jan 1 08:00:03 kunos user.info kernel: [ 1.765537] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
Jan 1 08:00:03 kunos user.info kernel: [ 1.768974] usbcore: registered new interface driver usbhid
Jan 1 08:00:03 kunos user.info kernel: [ 1.781689] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
Jan 1 08:00:03 kunos user.info kernel: [ 1.786405] usbhid: USB HID core driver
Jan 1 08:00:03 kunos user.warn kernel: [ 1.803882] rp_power prepare build 3 gpio
Jan 1 08:00:03 kunos user.warn kernel: [ 1.808425] rp_power request vcc5v_usb12
Jan 1 08:00:03 kunos user.warn kernel: [ 1.812904] success request gpio160 out
Jan 1 08:00:03 kunos user.warn kernel: [ 1.817232] rp_power request vdd_3G
Jan 1 08:00:03 kunos user.warn kernel: [ 1.821188] success request gpio200 out
Jan 1 08:00:03 kunos user.info kernel: [ 1.823982] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
Jan 1 08:00:03 kunos user.warn kernel: [ 1.825510] rp_power request run_led
Jan 1 08:00:03 kunos user.info kernel: [ 1.837239] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
Jan 1 08:00:03 kunos user.warn kernel: [ 1.841219] success request gpio161 flash
Jan 1 08:00:03 kunos user.info kernel: [ 1.855817] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
Jan 1 08:00:03 kunos user.info kernel: [ 1.857565] input: gpio_event as /devices/platform/rp_power/input/input3
Jan 1 08:00:03 kunos user.warn kernel: [ 1.877302] rp_gpio prepare build 2 gpio
Jan 1 08:00:03 kunos user.warn kernel: [ 1.881824] rp_gpio request pa_pe10
Jan 1 08:00:03 kunos user.info kernel: [ 1.884710] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
Jan 1 08:00:03 kunos user.warn kernel: [ 1.885763] success request gpio138 out
Jan 1 08:00:03 kunos user.warn kernel: [ 1.901698] rp_gpio request host_pe11
Jan 1 08:00:03 kunos user.warn kernel: [ 1.905820] success request gpio139 out
Jan 1 08:00:03 kunos user.err kernel: [ 1.909769] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01)
Jan 1 08:00:03 kunos user.info kernel: [ 1.911352] usbcore: registered new interface driver snd-usb-audio
Jan 1 08:00:03 kunos user.err kernel: [ 1.920261] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01)
Jan 1 08:00:03 kunos user.info kernel: [ 1.929494] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1
Jan 1 08:00:03 kunos user.info kernel: [ 1.929494]
Jan 1 08:00:03 kunos user.err kernel: [ 1.936961] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01)
Jan 1 08:00:03 kunos user.info kernel: [ 1.954076] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
Jan 1 08:00:03 kunos user.err kernel: [ 1.963667] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01)
Jan 1 08:00:03 kunos user.info kernel: [ 1.975127] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished
Jan 1 08:00:03 kunos user.info kernel: [ 1.984751] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing MMC-HS(SDR20) dt B
Jan 1 08:00:03 kunos user.err kernel: [ 1.993924] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
Jan 1 08:00:03 kunos user.info kernel: [ 2.004908] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing MMC-HS(SDR20) dt B
Jan 1 08:00:03 kunos user.warn kernel: [ 2.014263] [SNDCODEC][sunxi_card_init][583]:card init finished
Jan 1 08:00:03 kunos user.info kernel: [ 2.026350] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing MMC-HS(SDR20) dt B
Jan 1 08:00:03 kunos user.info kernel: [ 2.044824] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing MMC-DDR52 dt B
Jan 1 08:00:03 kunos user.info kernel: [ 2.045017] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
Jan 1 08:00:03 kunos user.info kernel: [ 2.056525] mmc0: new DDR MMC card at address 0001
Jan 1 08:00:03 kunos user.info kernel: [ 2.067820] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input4
Jan 1 08:00:03 kunos user.info kernel: [ 2.073143] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
Jan 1 08:00:03 kunos user.info kernel: [ 2.084191] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished
Jan 1 08:00:03 kunos user.info kernel: [ 2.088737] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB, chardev (244:0)
Jan 1 08:00:03 kunos user.info kernel: [ 2.096716] NET: Registered protocol family 10
Jan 1 08:00:03 kunos user.info kernel: [ 2.107643] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
Jan 1 08:00:03 kunos user.info kernel: [ 2.108899] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch
Jan 1 08:00:03 kunos user.info kernel: [ 2.122370] Segment Routing with IPv6
Jan 1 08:00:03 kunos user.info kernel: [ 2.126617] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
Jan 1 08:00:03 kunos user.info kernel: [ 2.135062] NET: Registered protocol family 17
Jan 1 08:00:03 kunos user.info kernel: [ 2.140118] NET: Registered protocol family 15
Jan 1 08:00:03 kunos user.info kernel: [ 2.145203] can: controller area network core (rev 20170425 abi 9)
Jan 1 08:00:03 kunos user.info kernel: [ 2.152262] NET: Registered protocol family 29
Jan 1 08:00:03 kunos user.info kernel: [ 2.157278] can: raw protocol (rev 20170425)
Jan 1 08:00:03 kunos user.info kernel: [ 2.162131] can: broadcast manager protocol (rev 20170425 t)
Jan 1 08:00:03 kunos user.info kernel: [ 2.168498] can: netlink gateway (rev 20190810) max_hops=1
Jan 1 08:00:03 kunos user.info kernel: [ 2.174895] Bluetooth: RFCOMM TTY layer initialized
Jan 1 08:00:03 kunos user.info kernel: [ 2.180381] Bluetooth: RFCOMM socket layer initialized
Jan 1 08:00:03 kunos user.info kernel: [ 2.186213] Bluetooth: RFCOMM ver 1.11
Jan 1 08:00:03 kunos user.info kernel: [ 2.190463] lib80211: common routines for IEEE802.11 drivers
Jan 1 08:00:03 kunos user.debug kernel: [ 2.196863] lib80211_crypt: registered algorithm 'NULL'
Jan 1 08:00:03 kunos user.info kernel: [ 2.200747] usb 1-1.4: new high-speed USB device number 3 using sunxi-ehci
Jan 1 08:00:03 kunos user.debug kernel: [ 2.202739] lib80211_crypt: registered algorithm 'WEP'
Jan 1 08:00:03 kunos user.debug kernel: [ 2.216257] lib80211_crypt: registered algorithm 'CCMP'
Jan 1 08:00:03 kunos user.debug kernel: [ 2.222163] lib80211_crypt: registered algorithm 'TKIP'
Jan 1 08:00:03 kunos user.notice kernel: [ 2.228793] Registering SWP/SWPB emulation handler
Jan 1 08:00:03 kunos user.notice kernel: [ 2.234573] Loading compiled-in X.509 certificates
Jan 1 08:00:03 kunos user.err kernel: [ 2.240553] tv_probe()1527 - of_property_read_string tv_power failed!
Jan 1 08:00:03 kunos user.err kernel: [ 2.248747] get_key_map_info()168 - Failed to find "tvou" in dts.
Jan 1 08:00:03 kunos user.warn kernel: [ 2.255891] tv probe finished!
Jan 1 08:00:03 kunos user.warn kernel: [ 2.279358] sunxi-i2c sunxi-i2c3: sunxi-i2c3 supply twi not found, using dummy regulator
Jan 1 08:00:03 kunos user.info kernel: [ 2.289725] goodix-ts 3-005d: GTP Driver Version: V2.8.0.2<2017/12/14>
Jan 1 08:00:03 kunos user.info kernel: [ 2.297100] goodix-ts 3-005d: GTP I2C Address: 0x5d
Jan 1 08:00:03 kunos user.info kernel: [ 2.302604] goodix-ts 3-005d: touch input parameters is [id x y w p]<10 800 1280 512 512>
Jan 1 08:00:03 kunos user.info kernel: [ 2.311821] goodix-ts 3-005d: Failed get int-trigger-type from dts,set default
Jan 1 08:00:03 kunos user.info kernel: [ 2.319937] goodix-ts 3-005d: int-sync enabled
Jan 1 08:00:03 kunos user.info kernel: [ 2.324951] goodix-ts 3-005d: esd-protect enabled
Jan 1 08:00:03 kunos user.warn kernel: [ 2.330280] goodix-ts 3-005d: 3-005d supply vdd_ana not found, using dummy regulator
Jan 1 08:00:03 kunos user.warn kernel: [ 2.339302] goodix-ts 3-005d: 3-005d supply vcc_i2c not found, using dummy regulator
Jan 1 08:00:03 kunos user.info kernel: [ 2.348106] goodix-ts 3-005d: No pinctrl found
Jan 1 08:00:03 kunos user.info kernel: [ 2.353131] goodix-ts 3-005d: Success request irq-gpio
Jan 1 08:00:03 kunos user.info kernel: [ 2.358933] goodix-ts 3-005d: Success request rst-gpio
Jan 1 08:00:03 kunos user.info kernel: [ 2.364711] goodix-ts 3-005d: Guitar reset
Jan 1 08:00:03 kunos user.info kernel: [ 2.471078] goodix-ts 3-005d: I2C Addr is 5d
Jan 1 08:00:03 kunos user.info kernel: [ 2.476187] goodix-ts 3-005d: IC Version: 928_1080
Jan 1 08:00:03 kunos user.notice kernel: [ 2.481829] random: fast init done
Jan 1 08:00:03 kunos user.info kernel: [ 2.485734] goodix-ts 3-005d: Driver set not send config
Jan 1 08:00:03 kunos user.info kernel: [ 2.498305] goodix-ts 3-005d: Use slot report protocol
Jan 1 08:00:03 kunos user.info kernel: [ 2.504367] input: goodix-ts as /devices/virtual/input/input5
Jan 1 08:00:03 kunos user.info kernel: [ 2.511090] goodix-ts 3-005d: INT num 67, trigger type:1
Jan 1 08:00:03 kunos user.info kernel: [ 2.517280] goodix-ts 3-005d: create proc entry gt9xx_config success
Jan 1 08:00:03 kunos user.info kernel: [ 2.524516] goodix-ts 3-005d: Alloc memory size:3070.
Jan 1 08:00:03 kunos user.info kernel: [ 2.530186] goodix-ts 3-005d: I2C function: without pre and end cmd!
Jan 1 08:00:03 kunos user.info kernel: [ 2.537350] goodix-ts 3-005d: Create proc entry success!
Jan 1 08:00:03 kunos user.info kernel: [ 2.543361] goodix-ts 3-005d: ESD on
Jan 1 08:00:03 kunos user.info kernel: [ 2.547515] sunxi-i2c sunxi-i2c3: probe success
Jan 1 08:00:03 kunos user.warn kernel: [ 2.554637] fly=====sun8iw20_nvmem_xlate:ver_data.nv_speed=0x93406000
Jan 1 08:00:03 kunos user.warn kernel: [ 2.561898] fly:ver_data.version=2,ver_data.name=b0
Jan 1 08:00:03 kunos user.err kernel: [ 2.573420] sunxi_pwm_enable_dual: can't parse pwm device
Jan 1 08:00:03 kunos user.err kernel: [ 2.579532] sunxi_pwm_enable_dual: can't parse pwm device
Jan 1 08:00:03 kunos user.err kernel: [ 2.585653] cpu cpu0: _set_opp_voltage: failed to set voltage (950000 950000 950000 mV): -19
Jan 1 08:00:03 kunos user.err kernel: [ 2.595240] sunxi_pwm_enable_dual: can't parse pwm device
Jan 1 08:00:03 kunos user.err kernel: [ 2.601388] sunxi_pwm_enable_dual: can't parse pwm device
Jan 1 08:00:03 kunos user.err kernel: [ 2.607467] cpu cpu0: _set_opp_voltage: failed to set voltage (950000 950000 950000 mV): -19
Jan 1 08:00:03 kunos user.err kernel: [ 2.616954] cpufreq: __target_index: Failed to change cpu frequency: -19
Jan 1 08:00:03 kunos user.err kernel: [ 2.625957] sunxi_pwm_enable_dual: can't parse pwm device
Jan 1 08:00:03 kunos user.notice kernel: [ 2.630162] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jan 1 08:00:03 kunos user.err kernel: [ 2.632168] sunxi_pwm_enable_dual: can't parse pwm device
Jan 1 08:00:03 kunos user.notice kernel: [ 2.645057] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jan 1 08:00:03 kunos user.err kernel: [ 2.646965] cpu cpu0: _set_opp_voltage: failed to set voltage (950000 950000 950000 mV): -19
Jan 1 08:00:03 kunos user.warn kernel: [ 2.654633] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Jan 1 08:00:03 kunos user.err kernel: [ 2.664140] sunxi_pwm_enable_dual: can't parse pwm device
Jan 1 08:00:03 kunos user.warn kernel: [ 2.673492] clk: Not disabling unused clocks
Jan 1 08:00:03 kunos user.info kernel: [ 2.673517] ALSA device list:
Jan 1 08:00:03 kunos user.info kernel: [ 2.673523] #0: audiocodec
Jan 1 08:00:03 kunos user.warn kernel: [ 2.673561] alloc_fd: slot 0 not NULL!
Jan 1 08:00:03 kunos user.err kernel: [ 2.679686] sunxi_pwm_enable_dual: can't parse pwm device
Jan 1 08:00:03 kunos user.info kernel: [ 2.684536] cfg80211: failed to load regulatory.db
Jan 1 08:00:03 kunos user.err kernel: [ 2.687770] cpu cpu0: _set_opp_voltage: failed to set voltage (950000 950000 950000 mV): -19
Jan 1 08:00:03 kunos user.err kernel: [ 2.716158] cpufreq: __target_index: Failed to change cpu frequency: -19
Jan 1 08:00:03 kunos user.info kernel: [ 2.726470] EXT4-fs (mmcblk0p6): INFO: recovery required on readonly filesystem
Jan 1 08:00:03 kunos user.info kernel: [ 2.734729] EXT4-fs (mmcblk0p6): write access will be enabled during recovery
Jan 1 08:00:03 kunos user.info kernel: [ 2.750777] usb 1-1.2: new high-speed USB device number 4 using sunxi-ehci
Jan 1 08:00:03 kunos user.info kernel: [ 2.773329] EXT4-fs (mmcblk0p6): recovery complete
Jan 1 08:00:03 kunos user.info kernel: [ 2.779891] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
Jan 1 08:00:03 kunos user.info kernel: [ 2.789089] VFS: Mounted root (ext4 filesystem) readonly on device 179:6.
Jan 1 08:00:03 kunos user.info kernel: [ 2.798848] Freeing unused kernel memory: 1024K
Jan 1 08:00:03 kunos user.err kernel: [ 2.820909] Kernel init done
Jan 1 08:00:03 kunos user.info kernel: [ 2.824143] Run /init as init process
Jan 1 08:00:03 kunos user.info kernel: [ 2.906841] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
Jan 1 08:00:03 kunos user.info kernel: [ 2.916215] usb-storage 1-1.2:1.0: USB Mass Storage device detected
Jan 1 08:00:03 kunos user.info kernel: [ 2.924123] scsi host0: usb-storage 1-1.2:1.0
Jan 1 08:00:03 kunos user.warn kernel: [ 3.063347] EXT4-fs (mmcblk0p8): warning: mounting unchecked fs, running e2fsck is recommended
Jan 1 08:00:03 kunos user.info kernel: [ 3.074236] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
Jan 1 08:00:03 kunos daemon.info kernel: [ 3.128929] udevd[1051]: starting version 3.2.7
Jan 1 08:00:03 kunos user.notice kernel: [ 3.147033] random: udevd: uninitialized urandom read (16 bytes read)
Jan 1 08:00:03 kunos user.notice kernel: [ 3.155562] random: udevd: uninitialized urandom read (16 bytes read)
Jan 1 08:00:03 kunos user.notice kernel: [ 3.162976] random: udevd: uninitialized urandom read (16 bytes read)
Jan 1 08:00:03 kunos daemon.err kernel: [ 3.175892] udevd[1051]: specified group 'input' unknown
Jan 1 08:00:03 kunos daemon.err kernel: [ 3.182868] udevd[1051]: specified group 'kvm' unknown
Jan 1 08:00:03 kunos daemon.info kernel: [ 3.207762] udevd[1052]: starting eudev-3.2.7
Jan 1 08:00:03 kunos user.info kernel: [ 3.402613] usb 1-1.1: new high-speed USB device number 5 using sunxi-ehci
Jan 1 08:00:03 kunos user.info kernel: [ 3.599209] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
Jan 1 08:00:03 kunos user.info kernel: [ 3.674484] usbcore: registered new interface driver rtk_btusb
Jan 1 08:00:03 kunos user.info kernel: [ 3.868637] usb 1-1.1: USB disconnect, device number 5
Jan 1 08:00:03 kunos user.notice kernel: [ 3.961689] scsi 0:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4
Jan 1 08:00:03 kunos user.notice kernel: [ 3.973484] sd 0:0:0:0: [sda] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
Jan 1 08:00:03 kunos user.notice kernel: [ 3.983673] sd 0:0:0:0: [sda] Write Protect is off
Jan 1 08:00:03 kunos user.debug kernel: [ 3.989064] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
Jan 1 08:00:03 kunos user.err kernel: [ 3.995768] sd 0:0:0:0: [sda] No Caching mode page found
Jan 1 08:00:03 kunos user.err kernel: [ 4.001784] sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 08:00:04 kunos user.info kernel: [ 4.046101] usbcore: registered new interface driver rtl8723du
Jan 1 08:00:04 kunos user.info kernel: [ 4.055860] sda: sda1
Jan 1 08:00:04 kunos user.notice kernel: [ 4.082089] sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan 1 08:00:04 kunos user.warn kernel: [ 4.162342] urandom_read: 3 callbacks suppressed
Jan 1 08:00:04 kunos user.notice kernel: [ 4.162352] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
Jan 1 08:00:04 kunos user.notice kernel: [ 4.175735] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
Jan 1 08:00:04 kunos user.notice kernel: [ 4.204467] random: dbus-daemon: uninitialized urandom read (12 bytes read)
Jan 1 08:00:04 kunos daemon.info dhcpcd[1143]: dev: loaded udev
Jan 1 08:00:04 kunos daemon.err dhcpcd[1143]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:04 kunos daemon.err dhcpcd[1143]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:04 kunos daemon.err dhcpcd[1143]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:04 kunos daemon.err dhcpcd[1143]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:04 kunos daemon.warn dhcpcd[1143]: no interfaces have a carrier
Jan 1 08:00:04 kunos daemon.info dhcpcd[1143]: forked to background, child pid 1153
--------------------------------------------------------ntpd------------------------------------------------------------------------------
Jan 1 08:00:04 kunos daemon.notice ntpd[1155]: ntpd 4.2.8p13@1.3847-o Tue Dec 12 10:39:13 UTC 2023 (1): Starting
Jan 1 08:00:04 kunos daemon.info ntpd[1155]: Command line: /usr/sbin/ntpd -g
Jan 1 08:00:04 kunos daemon.info ntpd[1157]: proto: precision = 2.292 usec (-19)
Jan 1 08:00:04 kunos daemon.info ntpd[1157]: basedate set to 2023-11-30
Jan 1 08:00:04 kunos daemon.info ntpd[1157]: gps base set to 2023-12-03 (week 2291)
Jan 1 08:00:04 kunos daemon.info ntpd[1157]: Listen and drop on 0 v6wildcard [::]:123
Jan 1 08:00:04 kunos daemon.info ntpd[1157]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Jan 1 08:00:04 kunos user.info kernel: [ 4.568879] libphy: 4500000.eth: probed
Jan 1 08:00:04 kunos user.info kernel: [ 4.574380] sunxi-gmac 4500000.eth eth0: eth0: Type(7) PHY ID 937c4024 at 0 IRQ poll (4500000.eth-0:00)
Jan 1 08:00:04 kunos daemon.info dhcpcd[1153]: eth0: waiting for carrier
Jan 1 08:00:04 kunos daemon.info bluetoothd[1159]: Bluetooth daemon 5.50
Jan 1 08:00:04 kunos daemon.info bluetoothd[1159]: Starting SDP server
Jan 1 08:00:04 kunos daemon.warn bluetoothd[1159]: kernel lacks bnep-protocol support
Jan 1 08:00:04 kunos daemon.warn bluetoothd[1159]: System does not support network plugin
Jan 1 08:00:04 kunos daemon.info bluetoothd[1159]: Bluetooth management interface 1.14 initialized
Jan 1 08:00:04 kunos daemon.err bluetoothd[1159]: Sap driver initialization failed.
Jan 1 08:00:04 kunos daemon.err bluetoothd[1159]: sap-server: Operation not permitted (1)
Jan 1 08:00:04 kunos daemon.info bluetoothd[1159]: Endpoint registered: sender=:1.1 path=/A2DP/MPEG24/Sink/1
Jan 1 08:00:04 kunos daemon.info bluetoothd[1159]: Endpoint registered: sender=:1.1 path=/A2DP/SBC/Sink/1
Jan 1 08:00:04 kunos daemon.info dhcpcd[1153]: wlan0: waiting for carrier
Jan 1 08:00:04 kunos daemon.info dhcpcd[1153]: eth0: carrier acquired
Jan 1 08:00:04 kunos daemon.info ntpd[1157]: Listen normally on 2 lo 127.0.0.1:123
Jan 1 08:00:04 kunos daemon.info ntpd[1157]: Listen normally on 3 lo [::1]:123
Jan 1 08:00:04 kunos daemon.info ntpd[1157]: Listening on routing socket on fd #20 for interface updates
Jan 1 08:00:04 kunos daemon.info ntpd[1157]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
Jan 1 08:00:04 kunos daemon.info ntpd[1157]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
Jan 1 08:00:04 kunos daemon.err dhcpcd[1153]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:04 kunos daemon.info dhcpcd[1153]: DUID 00:01:00:01:c7:92:bc:86:42:b8:60:2e:e4:b9
Jan 1 08:00:04 kunos daemon.info dhcpcd[1153]: eth0: IAID 28:1d:23:a0
Jan 1 08:00:04 kunos daemon.info dhcpcd[1153]: eth0: adding address fe80::80e6:ebb2:6610:a869
Jan 1 08:00:04 kunos daemon.info dhcpcd[1153]: eth0: carrier lost
Jan 1 08:00:04 kunos daemon.err dhcpcd[1153]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:04 kunos daemon.info dhcpcd[1153]: eth0: deleting address fe80::80e6:ebb2:6610:a869
Jan 1 08:00:05 kunos user.info kernel: [ 5.190753] usb 1-1.1: new high-speed USB device number 6 using sunxi-ehci
Jan 1 08:00:05 kunos user.warn kernel: [ 5.341472] usb 1-1.1: config 1 has an invalid interface number: 6 but max is 5
Jan 1 08:00:05 kunos user.warn kernel: [ 5.349694] usb 1-1.1: config 1 has no interface number 5
Jan 1 08:00:05 kunos user.info kernel: [ 5.363459] cdc_ether 1-1.1:1.0 usb0: register 'cdc_ether' at usb-sunxi-ehci-1.1, CDC Ethernet Device, ae:0c:29:a3:9b:6d
Jan 1 08:00:05 kunos user.info kernel: [ 5.377464] option 1-1.1:1.2: GSM modem (1-port) converter detected
Jan 1 08:00:05 kunos user.info kernel: [ 5.385214] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
Jan 1 08:00:05 kunos user.info kernel: [ 5.394615] option 1-1.1:1.3: GSM modem (1-port) converter detected
Jan 1 08:00:05 kunos user.info kernel: [ 5.402343] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
Jan 1 08:00:05 kunos user.info kernel: [ 5.411816] option 1-1.1:1.4: GSM modem (1-port) converter detected
Jan 1 08:00:05 kunos user.info kernel: [ 5.419388] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
Jan 1 08:00:05 kunos user.info kernel: [ 5.429001] option 1-1.1:1.6: GSM modem (1-port) converter detected
Jan 1 08:00:05 kunos user.info kernel: [ 5.436660] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB3
Jan 1 08:00:05 kunos daemon.err dhcpcd[1153]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:05 kunos daemon.err dhcpcd[1153]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:05 kunos daemon.info dhcpcd[1153]: usb0: waiting for carrier
Jan 1 08:00:05 kunos daemon.info dhcpcd[1153]: usb0: carrier acquired
Jan 1 08:00:05 kunos daemon.err dhcpcd[1153]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:05 kunos daemon.info dhcpcd[1153]: usb0: IAID 29:a3:9b:6d
Jan 1 08:00:05 kunos daemon.info dhcpcd[1153]: usb0: adding address fe80::b91b:5641:ca30:9a3f
Jan 1 08:00:05 kunos daemon.info dhcpcd[1153]: usb0: carrier lost
Jan 1 08:00:05 kunos daemon.err dhcpcd[1153]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:05 kunos daemon.info dhcpcd[1153]: usb0: deleting address fe80::b91b:5641:ca30:9a3f
Jan 1 08:00:06 kunos daemon.info dhcpcd[1153]: usb0: carrier acquired
Jan 1 08:00:06 kunos daemon.err dhcpcd[1153]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:06 kunos daemon.info dhcpcd[1153]: usb0: IAID 29:a3:9b:6d
Jan 1 08:00:06 kunos daemon.info dhcpcd[1153]: usb0: adding address fe80::b91b:5641:ca30:9a3f
Jan 1 08:00:06 kunos user.warn kernel: [ 6.240740]
Jan 1 08:00:06 kunos user.warn kernel: [ 6.240740] insmod_device_driver
Jan 1 08:00:06 kunos user.warn kernel: [ 6.240740]
Jan 1 08:00:06 kunos user.warn kernel: [ 6.247980] sunxi_usb_udc 4100000.udc-controller: 4100000.udc-controller supply udc not found, using dummy regulator
Jan 1 08:00:06 kunos daemon.info dhcpcd[1153]: usb0: soliciting a DHCP lease
Jan 1 08:00:06 kunos daemon.info dhcpcd[1153]: usb0: soliciting an IPv6 router
Jan 1 08:00:06 kunos authpriv.info dropbear[1187]: Running in background
------------------------------------------------------------Internet Systems Consortium DHCP Server 4.3.6---------------------------------------------------------------------------------
Jan 1 08:00:06 kunos local7.info dhcpd: Internet Systems Consortium DHCP Server 4.3.6
Jan 1 08:00:06 kunos local7.info dhcpd: Copyright 2004-2017 Internet Systems Consortium.
Jan 1 08:00:06 kunos local7.info dhcpd: All rights reserved.
Jan 1 08:00:06 kunos local7.info dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Jan 1 08:00:06 kunos local7.info dhcpd: Wrote 0 leases to leases file.
Jan 1 08:00:07 kunos user.warn kernel: [ 7.031081] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jan 1 08:00:07 kunos daemon.info nit: starting pid 1231, tty '': '-/bin/sh'
Jan 1 08:00:07 kunos user.info kernel: [ 7.233914] file system registered
Jan 1 08:00:07 kunos user.info kernel: [ 7.324619] read descriptors
Jan 1 08:00:07 kunos user.info kernel: [ 7.329985] read strings
Jan 1 08:00:07 kunos daemon.err ntpd[1157]: bind(23) AF_INET6 fe80::b91b:5641:ca30:9a3f%6#123 flags 0x11 failed: Cannot assign requested address
Jan 1 08:00:07 kunos daemon.err ntpd[1157]: unable to create socket on usb0 (4) for fe80::b91b:5641:ca30:9a3f%6#123
Jan 1 08:00:07 kunos daemon.info ntpd[1157]: failed to init interface for address fe80::b91b:5641:ca30:9a3f%6
------------------------------------------------------------------------------------------------------------------------------------------------
Jan 1 08:00:07 kunos daemon.info pppd[1292]: pppd options in effect:
Jan 1 08:00:07 kunos daemon.info pppd[1292]: debug # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: nodetach # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: dump # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: noauth # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: user user # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: password ?????? # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: /dev/ttyUSB2 # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: 115200 # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: lock # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: connect ''chat -s -v ABORT BUSY ABORT \"NO CARRIER\" ABORT \"NO DIALTONE\" ABORT ERROR ABORT \"NO ANSWER\" TIMEOUT 30 \"\" AT OK ATE0 OK ATI\\;+CSUB\\;+CSQ\\;+CPIN?\\;+COPS?\\;+CGREG?\\;\\&D2 OK AT+CGDCONT=1,\\\"IP\\\",\\\"
Jan 1 08:00:07 kunos daemon.info pppd[1292]: # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: disconnect chat -s -v ABORT ERROR ABORT \"NO DIALTONE\" SAY \"\\nSending break to the modem\\n\" \"\" +++ \"\" +++ \"\" +++ SAY \"\\nGood bay\\n\" # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: nocrtscts # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: modem # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: novj # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: novjccomp # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: ipcp-accept-local # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: ipcp-accept-remote # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: noipdefault # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: ipcp-max-configure 30 # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: defaultroute # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: usepeerdns # (from command line)
Jan 1 08:00:07 kunos daemon.info pppd[1292]: noccp # (from command line)
Jan 1 08:00:07 kunos daemon.notice pppd[1292]: pppd 2.4.7 started by root, uid 0
Jan 1 08:00:08 kunos local2.info chat[1294]: abort on (BUSY)
Jan 1 08:00:08 kunos local2.info chat[1294]: abort on (NO CARRIER)
Jan 1 08:00:08 kunos local2.info chat[1294]: abort on (NO DIALTONE)
Jan 1 08:00:08 kunos local2.info chat[1294]: abort on (ERROR)
Jan 1 08:00:08 kunos local2.info chat[1294]: abort on (NO ANSWER)
Jan 1 08:00:08 kunos local2.info chat[1294]: timeout set to 30 seconds
Jan 1 08:00:08 kunos local2.info chat[1294]: send (AT^M)
Jan 1 08:00:08 kunos local2.info chat[1294]: expect (OK)
Jan 1 08:00:08 kunos local2.info chat[1294]: AT^M^M
Jan 1 08:00:08 kunos local2.info chat[1294]: OK
Jan 1 08:00:08 kunos local2.info chat[1294]: -- got it
Jan 1 08:00:08 kunos local2.info chat[1294]: send (ATE0^M)
Jan 1 08:00:08 kunos local2.info chat[1294]: expect (OK)
Jan 1 08:00:08 kunos local2.info chat[1294]: ^M
Jan 1 08:00:08 kunos local2.info chat[1294]: ATE0^M^M
Jan 1 08:00:08 kunos local2.info chat[1294]: OK
Jan 1 08:00:08 kunos local2.info chat[1294]: -- got it
Jan 1 08:00:08 kunos local2.info chat[1294]: send (ATI;+CSUB;+CSQ;+CPIN?;+COPS?;+CGREG?;&D2^M)
Jan 1 08:00:09 kunos local2.info chat[1294]: expect (OK)
Jan 1 08:00:09 kunos local2.info chat[1294]: ^M
Jan 1 08:00:09 kunos local2.info chat[1294]: ^M
Jan 1 08:00:09 kunos local2.info chat[1294]: Quectel^M
Jan 1 08:00:09 kunos local2.info chat[1294]: EC800M^M
Jan 1 08:00:09 kunos local2.info chat[1294]: Revision: EC800MCNLFR06A02M04^M
Jan 1 08:00:09 kunos local2.info chat[1294]: ^M
Jan 1 08:00:09 kunos local2.info chat[1294]: SubEdition: V01^M
Jan 1 08:00:09 kunos local2.info chat[1294]: ^M
Jan 1 08:00:09 kunos local2.info chat[1294]: +CSQ: 18,99^M
Jan 1 08:00:09 kunos local2.info chat[1294]: ^M
Jan 1 08:00:09 kunos local2.info chat[1294]: +CGREG: 0,0^M
Jan 1 08:00:09 kunos local2.info chat[1294]: ^M
Jan 1 08:00:09 kunos local2.info chat[1294]: +CPIN: READY^M
Jan 1 08:00:09 kunos local2.info chat[1294]: ^M
Jan 1 08:00:09 kunos local2.info chat[1294]: +COPS: 0^M
Jan 1 08:00:09 kunos local2.info chat[1294]: ^M
Jan 1 08:00:09 kunos local2.info chat[1294]: OK
Jan 1 08:00:09 kunos local2.info chat[1294]: -- got it
Jan 1 08:00:09 kunos local2.info chat[1294]: send (AT+CGDCONT=1,"IP","3gnet",,0,0^M)
Jan 1 08:00:09 kunos user.warn kernel: [ 9.400747]
Jan 1 08:00:09 kunos user.warn kernel: [ 9.400747] rmmod_device_driver
Jan 1 08:00:09 kunos user.warn kernel: [ 9.400747]
Jan 1 08:00:09 kunos user.warn kernel: [ 9.407666] rmmod_device_driver()223 WARN: get power supply failed
Jan 1 08:00:09 kunos user.warn kernel: [ 9.415082]
Jan 1 08:00:09 kunos user.warn kernel: [ 9.415082] insmod_device_driver
Jan 1 08:00:09 kunos user.warn kernel: [ 9.415082]
Jan 1 08:00:09 kunos daemon.info ntpd[1157]: Listen normally on 5 usb0 [fe80::b91b:5641:ca30:9a3f%6]:123
Jan 1 08:00:09 kunos local2.info chat[1294]: expect (OK)
Jan 1 08:00:09 kunos local2.info chat[1294]: ^M
Jan 1 08:00:09 kunos user.warn kernel: [ 9.725316] sunxi_set_cur_vol_work()398 WARN: get power supply failed
Jan 1 08:00:09 kunos user.info kernel: [ 9.809312] android_work: sent uevent USB_STATE=CONNECTED
Jan 1 08:00:09 kunos user.warn kernel: [ 9.820159] sunxi_set_cur_vol_work()398 WARN: get power supply failed
Jan 1 08:00:09 kunos user.info kernel: [ 9.945913] configfs-gadget gadget: high-speed config #1: c
Jan 1 08:00:09 kunos user.info kernel: [ 9.953807] android_work: sent uevent USB_STATE=CONFIGURED
Jan 1 08:00:10 kunos user.notice kernel: [ 10.120783] random: crng init done
Jan 1 08:00:10 kunos user.notice kernel: [ 10.124610] random: 1 urandom warning(s) missed due to ratelimiting
Jan 1 08:00:10 kunos local2.info chat[1294]: ^M
Jan 1 08:00:10 kunos local2.info chat[1294]: OK
Jan 1 08:00:10 kunos local2.info chat[1294]: -- got it
Jan 1 08:00:10 kunos local2.info chat[1294]: send (ATD*99#^M)
Jan 1 08:00:10 kunos daemon.info dhcpcd[1153]: usb0: offered 192.168.43.100 from 192.168.43.1
Jan 1 08:00:10 kunos daemon.info dhcpcd[1153]: usb0: probing address 192.168.43.100/24
Jan 1 08:00:10 kunos local2.info chat[1294]: expect (CONNECT)
Jan 1 08:00:10 kunos local2.info chat[1294]: ^M
Jan 1 08:00:10 kunos local2.info chat[1294]: ^M
Jan 1 08:00:10 kunos local2.info chat[1294]: CONNECT
Jan 1 08:00:10 kunos local2.info chat[1294]: -- got it
Jan 1 08:00:10 kunos daemon.debug pppd[1292]: Script ''chat -s -v ABORT BUSY ABORT "NO CARRIER" ABORT "NO DIALTONE" ABORT ERROR ABORT "NO ANSWER" TIMEOUT 30 "" AT OK ATE0 OK ATI\;+CSUB\;+CSQ\;+CPIN?\;+COPS?\;+CGREG?\;\&D2 OK AT+CGDCONT=1,\"IP\",\"3gnet\",,0,0 OK ATD*99
Jan 1 08:00:10 kunos daemon.info pppd[1292]: Serial connection established.
Jan 1 08:00:10 kunos daemon.debug pppd[1292]: using channel 1
Jan 1 08:00:10 kunos daemon.info pppd[1292]: Using interface ppp0
Jan 1 08:00:10 kunos daemon.notice pppd[1292]: Connect: ppp0 <--> /dev/ttyUSB2
Jan 1 08:00:11 kunos daemon.debug pppd[1292]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd8ae5081> <pcomp> <accomp>]
Jan 1 08:00:11 kunos daemon.debug pppd[1292]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xd8ae5081> <pcomp> <accomp>]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd8ae5081> <pcomp> <accomp>]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <auth pap> <magic 0x6665698a> <pcomp> <accomp>]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: sent [LCP ConfAck id=0x2 <asyncmap 0x0> <auth pap> <magic 0x6665698a> <pcomp> <accomp>]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xd8ae5081> <pcomp> <accomp>]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: sent [PAP AuthReq id=0x1 user="user" password=<hidden>]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: rcvd [PAP AuthAck id=0x1 "" 00]
Jan 1 08:00:14 kunos daemon.notice pppd[1292]: PAP authentication succeeded
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: rcvd [IPCP ConfReq id=0x3]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: sent [IPCP ConfNak id=0x3 <addr 0.0.0.0>]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: rcvd [IPCP ConfNak id=0x1 <addr 10.118.76.226> <ms-dns1 211.138.21.66> <ms-dns2 211.138.23.66>]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: sent [IPCP ConfReq id=0x2 <addr 10.118.76.226> <ms-dns1 211.138.21.66> <ms-dns2 211.138.23.66>]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: rcvd [IPCP ConfReq id=0x4]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: sent [IPCP ConfAck id=0x4]
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: rcvd [IPCP ConfAck id=0x2 <addr 10.118.76.226> <ms-dns1 211.138.21.66> <ms-dns2 211.138.23.66>]
Jan 1 08:00:14 kunos daemon.warn pppd[1292]: Could not determine remote IP address: defaulting to 10.64.64.64
Jan 1 08:00:14 kunos daemon.notice pppd[1292]: local IP address 10.118.76.226
Jan 1 08:00:14 kunos daemon.notice pppd[1292]: remote IP address 10.64.64.64
Jan 1 08:00:14 kunos daemon.notice pppd[1292]: primary DNS address 211.138.21.66
Jan 1 08:00:14 kunos daemon.notice pppd[1292]: secondary DNS address 211.138.23.66
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: Script /etc/ppp/ip-up started (pid 1338)
Jan 1 08:00:14 kunos daemon.debug pppd[1292]: Script /etc/ppp/ip-up finished (pid 1338), status = 0x0
Jan 1 08:00:15 kunos daemon.info ntpd[1157]: Listen normally on 6 ppp0 10.118.76.226:123
Jan 1 08:00:15 kunos daemon.info dhcpcd[1153]: usb0: leased 192.168.43.100 for 86400 seconds
Jan 1 08:00:15 kunos daemon.info dhcpcd[1153]: usb0: adding route to 192.168.43.0/24
Jan 1 08:00:15 kunos daemon.info dhcpcd[1153]: usb0: adding default route via 192.168.43.1
Jan 1 08:00:15 kunos daemon.err dhcpcd[1153]: script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: No such file or directory
Jan 1 08:00:16 kunos user.info kernel: [ 16.743849] raw_sendmsg: 4G-demon forgot to set AF_INET. Fix it!
Jan 1 08:00:17 kunos daemon.info ntpd[1157]: Listen normally on 7 usb0 192.168.43.100:123
Jan 1 08:00:19 kunos daemon.warn dhcpcd[1153]: usb0: no IPv6 Routers available
Dec 13 11:21:01 kunos daemon.info ntpd[1157]: receive: Unexpected origin timestamp 0x83aa7e9b.775da1b7 does not match aorg 0000000000.00000000 from server@5.79.108.34 xmt 0xe923a19d.a2e2c5ee
